Project details

Instructions

1. Treat the removed roof aging sponge cleanly, polish it with a wire brush or sandpaper, and wipe off the waste.

2. The operating environment is kept ventilated and dry; automotive interior materials need double-sided glue; car roofs need to be sprayed, and roof cloths also need to be sprayed; press the nozzle to spray about 10CM away from the material, and shoot 2-3 times back and forth, the effect Better.

3. After applying double-sided glue, let cool for 3-5 minutes. You can use the back of your hand to lightly test the glue layer. You can paste the material without sticking to the hand. When bonding, lay the cloth naturally, fix it firmly in the middle, and then drive to both sides. Press down on the recessed area directly, and press more and more back and forth on the arc position. The sticking part is generally not very flat, and it must be tightly bonded. The sticking part is pressed and contacted, and air is discharged from the inside and out.

4. It takes time for the adhesive layer to fully cure, usually about 24 hours. During this period, try not to move the adhesive layer. In addition, change the roof to operate, and it is recommended to put it back the next day.

5. Regarding the smell: Haobangshou 999 auto interior spray glue is made of imported rubber, extra-grade rosin, and environmentally friendly solvents. There is a slight smell during construction. During the curing process of the glue, the smell will gradually disappear with the curing time, mind Those who shoot carefully.